Filter By
Products List
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Airmar 10-Conductor In-Line Cable Splice - IP67 [D00342H]
AirmarDEAN-78208$31.0010-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be... -
Airmar 164WR-1 Crows Foot Transducer Wrench [164WR-1]
AirmarDEAN-57148$45.99RRP: $55.00164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut... -
Airmar 164WR-2 Transducer Hull Nut Wrench [164WR-2]
AirmarDEAN-57083$51.99RRP: $68.00164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For use... -
Airmar 175WR-4 Transducer Housing Wrench [175WR-4]
AirmarDEAN-57087$34.99RRP: $39.00175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench... -
Airmar 599 Low/High Frequency - In-Hull Chirp Transducer w/o Connector [R599C-LH]
AirmarDEAN-64842$5,737.50Low/High Frequency - In-Hull Chirp Transducer without ConnectorRely on Airmar's new broadband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain,... -
Airmar 60WR-3 Double Handle Transducer Wrench [60WR-3]
AirmarDEAN-57150$51.99RRP: $56.0060WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut... -
Airmar 60WR-4 Transducer Housing Wrench [60WR-4]
AirmarDEAN-57085$32.99RRP: $36.0060WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench... -
Airmar 75WR-2 Transducer Hull Nut Wrench [75WR-2]
AirmarDEAN-57082$42.99RRP: $46.0075WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench.For use... -
Airmar 75WR-3 Double Handle Transducer Wrench [75WR-3]
AirmarDEAN-57151$51.99RRP: $56.0075WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut... -
Airmar B175 Medium Ultra-Wide 1kW 12-Degree 12-Pin Connector f/Garmin [B175C-12-MW-12G]
AirmarDEAN-107583$1,799.00B175 Medium Ultra-Wide 1kW 12-Degree 12-Pin Connector for GarminAirmar's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready... -
Airmar B175H Bronze 20 Degree Thru-Hull 1kW f/Garmin w/8-Pin Connector [B175C-20-H-8G]
AirmarDEAN-108818$1,275.00B175H Bronze 20 Degree Thru-Hull 1kW for Garmin with 8-Pin ConnectorAirmar’s low-profile, Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The... -
Airmar B175H Bronze Thru Hull 20 Tilt - 1kW - Requires Mix and Match Cable [B175C-20-H-MM]
AirmarDEAN-68016$1,164.00B175H Bronze Thru Hull 20° Tilt - 1kWRequires Mix and Match CableRely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman,...